Advanced Powder Technology のご案内
![[English]](../images/englishf.gif)
Advanced Powder Technology のご案内
IndexAdvanced Powder Technologyのご案内
Homepageへ
Advanced Powder Technology のご案内
目 的
Advanced Powder Technology 誌は，粉体および粒子状物質に関する研究を包括的に取り扱う国際誌であり，オリジナル論文，レビュー論文，速報，研究ノートのほか，世界中の優れた研究者の翻訳論文を定期的に出版することにより，粉体工学の発展に寄与することを目的としています。本誌は粉体工学会の英文誌として創刊されましたが，世界的に高名な研究者をエグゼクティブエディターに迎え，粉体工学研究の盛んな国々に独自の編集委員会を立ち上げて連携するなど，独創的かつ国際的な編集発行活動を展開しています。
論文の内容
Advanced Powder Technology 誌では，粒子のキャラクタリゼーション，粒子生成，表面改質，計算機シミュレーション・システム解析，反応器設計・粉体プロセス制御，気相・液相系単位操作，製薬・食品，セラミックス，エアロゾル，コロイド，粒子の運動・レオロジー，粉体層力学，安全性，貯糟・輸送，撹拌・混練，造粒・圧縮成形，粉砕・分級，流動層，乾燥，静電気，燃焼・集じん，凝集・分散，付着・沈着・再飛散，核発生・晶析・粒子成長など，粉体工学に関する多方面の研究を対象としています。
購 読
Vol.21の発行予定はNo.1（1月），No.2（3月），No.3（5月），No.4（7月），No.5（9月），No.6（11月）の年6回，購読料は先払い制で，年度途中の申込であってもすべて年間契約とします。また、お申込後のキャンセルについては、2010年2月末日までに事務局までご連絡下さい。
粉体工学会個人会員の場合：
1. 個人会員購読A（冊子送付およびScienceDirect利用） 26,000円
2. 個人会員購読B（冊子送付のみ） 16,000円
3. 個人会員購読C（ScienceDirect利用のみ） 10,000円
大学や所属機関でScienceDirectを利用できる方には「個人会員購読B」を推奨します。
2009年にScienceDirect上で利用できるパッケージ契約は「Freedom Collection」,
「Corporate Edition」, 「Chemical Engineering」です。2010年以降は，Materials Science,
Environmental Scienceのパッケージ契約でもご利用いただけます。）
購読申し込みは，ご希望の購読契約（A, B, Cのいずれか），氏名，所属先，冊子送付先，
電話／FAX，Emailをローマ字表記にてご明記の上，粉体工学会事務局(aptj@nifty.com)
までご連絡下さい。また購読料のお支払いにつきましては，振込手数料をご負担の上，
お申込から1ヶ月を目処に下記までお振り込み下さい。
振込先
銀行口座 みずほ銀行 出町（デマチ）支店 （普通）1238286
粉体工学会（読み方：フンタイコウガクカイ）
郵便振替 01000-3-27893 粉体工学会
個人会員以外の場合（図書館や事業所会員など）：
1. 日本国内の機関 164,800 円
2. 欧州およびイランの機関 986 ユーロ
3. その他上記以外の国に在する機関 1,253米ドル
個人会員以外の申し込み詳細につきましては，
エルゼビア・ジャパン株式会社カスタマーサービス
（Tel: 03-5561-5037, Fax: 03-5561-5047,
E-mail: JournalsCustomerServiceJapan@elsevier.com）まで
お問合せ下さい。
Guide for authorsSubmission of an article is understood to imply that the article is original and unpublished and is not being considered for publication elsewhere. Reviews and translated papers of specialized topics are also welcome, after the authors obtain preliminary approval from Editor-in-Chief. Upon acceptance of any article by the Journal, the author(s) will be asked to transfer the copyright of the article to the copyright holder. This transfer will ensure the widest possible dissemination of information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form.
Categories of submissions
-Original research paper
-Translated paper
-Rapid communication/Note
-Review article
-Letter to editor
-Book review
When submitting your article, the author chooses a suitable category, and request a chief of the editorial board you ask to review. If you are not request, your article is to be appropriately handled by the editorial office.
Page charge
There are no page charges.
General:
-Manuscript
Authors are requested to use double line spacing of the text and to be numbered beginning with the title page. The first page of an article should contain the title of the paper, the name(s) and address(es) of all the author(s) and the author to whom correspondence and proofs should be addressed. Even if you want to submit two or more consecutive papers with any sub-title, each paper is treated as an individual paper, so that you are not allowed to use the word “Part I and Part II ” and other similar words in the title. An abstract of up to 200 words, as well as up to five keywords, should follow the title page on a separate sheet.
Headings and subheadings for different sections of the paper (e.g. Introduction, Methods, Results, Discussion, Conclusion) should be clearly indicated. Units of measurement, abbreviations and symbols should follow the International System of Units (Sl). Equations and formulae should be typewritten. Equations should be numbered consecutively with Arabic numerals in parentheses on the right-hand side of the page.
-Length of text
For the final length of the printed article, authors should cover it within 20 sheets, including all tables and figures, expect in the case that Editor-in-Chief admits it in academic benefit.
-Tables and figures
All tables and figures should be made in electronic file for high-quality printing/reproduction and cited consecutively in the text. All the tables and figures, as well as its list of descriptive captions, should be provided at the end of the article separately from the text as original drawings. Tables should be given short informative titles and numbered consecutively in Arabic numerals, and figures should be submitted in a form tolerable for reproducing and resizing proportionally. Each table and figure should be numbered and each number should be indicated below it. Color printings of tables and figures are acceptable only if the authors pay for the cost. Regarding the cost, please contact the editorial office.
-Supplemental data
Data that are integral to the manuscript but impractical to include in the printed journal (for instance, large-scale data sets) or that are peripheral to the conclusions may be provided as supplemental data if the editor agrees that these data would be valuable to readers to understand the experimental support for important claims and conclusions. Files for the supplemental data should be uploaded when submission, separating from other files such as manuscript, figure and table through EES.
-Language
Papers will be published in English. Authors, especially non-English natives, must carefully check an article in style, spelling and syntax before submission.
-References
References should be cited in the text using a number in square brackets in order of appearance, and listed at the end of the paper in numerical order.
-List of reference
For a periodical
1. E. Otto and H. Fissan, Brownian coagulation of submicron particles, Adv. Powder Technol., 10, 1-20 (1999).
For a book
2. S. K. Friedlander, Smoke, Dust and Haze, pp. 119-142. Wiley, New York (1977).
For an article in a book
3. C. S. Campbell and A.V. Potapov, Computer simulation of particle breakage, in: Powder Technology Handbook, 2nd Edition, K. Gotoh, H. Masuda and K. Higashitani (Eds), pp. 795-809. Marcel Dekker, New York (1997).
For a paper in a conference proceedings
4. H. Takase, K. Higashi and M. Sugimoto, Effect of coal slurry properties on deashing by oil agglomeration, in: Proc. 2nd World Congress Particle Technol., IV, pp. 556-563. Kyoto (1990).
If a publication is in press, the reference should be made as complete as possible, stating the name of the journal and adding ‘in press’.
-Proofs
Proofs will be directly sent from the publisher to the corresponding author. No changes of the original manuscript are accepted at this stage. Proofs should be returned as soon as possible.
-Off prints
The corresponding author of all articles in the journal is provided by the publisher with an electronic copy or 25 paper-off prints of the published article without charge.
Further Information
Any questions of the journal should be directed to the editorial office:
The Society of Powder Technology, Japan
No.5 Kyoto Bldg.,181 Kitamachi, Karasuma-dori, Rokujo-agaru,
Shimogyo-ku, Kyoto 600-8176 Japan
Tel: +81-(0)75-351-2318, Fax: +81-(0)75-352-8530, E-mail: aptj@nifty.com
Topへ戻る